Maytag Dishwasher Wartungshandbuch PDF herunterladen (Seite 63)

Door Latch & Switch Holder Assembly

Two Door Switches are used in the Latch Assembly. Both

switches are normally CLOSED and will open only when

engaged by the Door Latch mechanism. Each switch is

in series with respect to L1 and neutral line operations.

Failure of either or both switches will result in rendering

the Dishwasher inoperative.

NOTE: Door Switches require no field adjustment.

Removal

1. Disconnect power to the machine.

2. Remove the Inner Door Panel. (See paragraph Inner

Door Panel removal).

3. Lift Door Latch Assembly out.

Switch Removal

1. Disconnect power to the machine.

2. Remove the Inner Door Panel. (See paragraph Inner

Door Panel removal).

3. Remove Door Latch and Switch Holder Assembly.

4. Depress locking tabs and lift switch from holder.

Service and Disassembly Procedures

! WARNING

To avoid risk of electrical shock, personal injury, or death, disconnect electrical power source to unit and discharge

capacitor through a 10,000 ohm resistor before attempting to service, unless test procedures require power to be

connected. Ensure all ground wires are connected before certifying unit as repaired and/or operational.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 89 90

Keine Kommentare

Maytag Dishwasher Wartungshandbuch Seite 63