Maytag MGR5765QDB Bedienungsanleitung Seite 6

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 80
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 5
LO: Use to simmer foods, keep foods
warm and melt chocolate or butter. Some
cooking may take place on the LO setting
if the pan is covered. It is possible to
reduce the heat by rotating the knob
toward OFF. Be sure flame is stable+
HI: Use to bring liquid to a boil, or reach
pressure in a pressure cooker. Always
reduce setting to a lower heat when liquids
begin to boil or foods begin to cook.
An intermediate flame size is used to
continue cooling. Food will not cook any
faster when a Mgher flame setting is used
than needed to maintain a gentle boil.
Water bolls at the same temperature
whether boiling gently or vigorously.
Surface Controls
o +ffinn _eshould go out during a cooking operation, turn
the burner off. If a strong gas odor is detected, open a
window and wait five minutes before relighting the
burne[
o Be sure all surface controls are set in the OFF position
before supplying gas to the range.
NEVER touch cooktop until it has cooled. Expect some
parts of the cooktop, especially around the burners, to
become warm or hot during cooking. Use potholders to
protect hands,
Pimot ess ignition
Pilotless ignition eliminates the
need for a constant standing
pilot light. Each surface burner
has a spark ignitor. Use care
when cleaning around the
surface burner.
If the surface burner does
not light, check if ignitor is
broken, soiled or wet.
BURNER CAP
Po_ gnitor
BURNER BASE
Surface Control Knobs
Use to turn on the surface burners. An infinite choice of heat
settings usavailable from LO to HL At the l-Irasetting a detent
or notch may be felt. The knobs can be set on or between any
of the settings.
Graphics next to the knob identify' which burner the O O
knob controls. For example, the graphic at right O O
shows the left front burner location.
5
Setting the controls:
The size and type of cookware will affect the heat setting. For
information on cookware and other factors affecting heat
settings, refer to "Cooking Made Simple" booklet.
1=Place a pan on the burner grate=
o The burner flame may lift off or appear separated from
the port if a pan is not placed on the grate=
2=Push in and turn the knob counterclockwise to the MTE
setting+
" A clicking (spark_)sound will be heard and the burner
will light+ (All four ignitors will spark when any surface
burner knob is turned to the MTE position=_)
3=After the burner lights, turn knob to desired flame size+
+ The ignitor will continue to spark until the knob is
turned past the MTE position+
Operating During a
Power Failure
controls are in the OFF position, Strike the match first and
hold it in position before turning the knob to MTE+
1. Hold a lighted match to the desired surface burner head.
2. Push in and turn the control knob slowly to UTE
3. Adjust the flame to the desired level.
Seitenansicht 5
1 2 3 4 5 6 7 8 9 10 11 ... 79 80

Kommentare zu diesen Handbüchern

Keine Kommentare