Maytag AOCS3040 Bedienungsanleitung PDF herunterladen (Seite 5)

Jenn-Air, Maytag and Magic Chef Fault Codes

WARNING

To avoid risk of electrical shock, personal injury or death; disconnect power and gas supply to oven before

servicing, unless testing requires power and/or gas.

16023509 5

PRODUCT(S): SLIDE-IN RANGES, JENN-AIR

MODEL YEAR(S): 2001 TO PRESENT

Fault

Code

Problem Component(s) to Check

F0-0 No Fault........................................................................ None.

F1-1 Oven temperature above 650˚ F in bake mode ........... Ohm sensor, harness, and door lock harness.

If ok, replace control.

F1-3 Oven temperature above 950˚ F in a clean cycle ........ Ohm sensor and harness. If ok, replace control.

F1-5 Cancel key not responding .......................................... Ensure ribbon is making good connection;

inspect ribbon (shorts, corrosion, etc.). Should

normally read open and 1K – 3K with the switch

activated. If ok, replace control.

F1-7 Membrane disconnected.............................................. Ensure ribbon is making good connection;

inspect ribbon (shorts, corrosion, etc.). Should

normally read open and 1K – 3K with the switch

activated. If ok, replace control.

F1-8 Shorted key in membrane switch................................. Ensure ribbon is making good connection;

inspect ribbon (shorts, corrosion, etc.). Should

normally read open and 1K – 3K with the switch

activated. If ok, replace control.

F1-9 Internal communication error within the control ........... Replace control.

F1-A Control does not see state of lock or unlock switches . Check connections at the door lock assembly to

control and check lock mechanism wiring

harness.

F1-C Door switch is not recognized as opened or closed .... Check connections at the door lock assembly to

control and check lock mechanism wiring

harness.

F1-E Control not calibrated ................................................... Replace control.

F1-H EEPROM error ............................................................. Replace control.

F1-N Internal voltage if slave micro not correct .................... Replace control.

F3-1 Sensor is shorted or open ............................................ Ohm sensor and harness.

F8 Shorted meat probe ..................................................... Check probe jack and harness to probe jack.

If ok, check meat probe.

F9-1 Door lock will not lock................................................... Check wire connections.

If ok, replace motorized door lock.

F9-2 Door lock will not release ............................................. Check wire connections.

If ok, replace motorized door lock.

F9-3 Door lock is locked and unlocked at the same time..... Check wire connections.

If ok, replace motorized door lock.

1 2 3 4 5 6 7 8 9 10 ... 18 19

Kommentare zu diesen Handbüchern

Keine Kommentare

Maytag AOCS3040 Bedienungsanleitung Seite 5

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Öfen Maytag AOCS3040