Maytag AOCS3040 Bedienungsanleitung PDF herunterladen (Seite 9)

Jenn-Air, Maytag and Magic Chef Fault Codes

WARNING

To avoid risk of electrical shock, personal injury or death; disconnect power and gas supply to oven before

servicing, unless testing requires power and/or gas.

16023509 9

PRODUCT(S): SLIDE-IN RANGES AND WALL OVENS, JENN-AIR, EMPLOYING

POWER RELAY BOARD SYSTEM

MODEL YEAR(S): PRIOR TO 1997

Fault

Code

Problem Component(s) to Check

F1 Element relay energized in non cook mode................. J2 harness shorted. If ohms ok, change power

relay board.

DOUBLE OVEN ONLY: Change 2

oven board.

F2 Oven temperature above 620˚ F in a non self clean

mode or over 950˚ F in a self clean mode ...................

Ohm sensor (see Table 4), harness, and check

door lock.** If ok, change power relay board.

F3 Cooling fan on in time of day mode ............................. Ohm sensor and harness** (see Table 4).

F4 Shorted oven sensor .................................................... Ohm sensor and harness** (see Table 4).

F5 No power to element relay in cook mode..................... Intermittent sensor or wire harness connection.

TECH TIP: Flick the sensor when checking ohms.

Look for no resistance.

Intermittent contact on power relay board.

F7 Shorted key sensed for 32 seconds............................. Membrane shorted.

Display board.

F8 Shorted meat probe ..................................................... Probe jack/harness to probe jack (see Table 3).

F9 Door lock safety circuit on relay board......................... Check door lock circuit. If ok, replace power

relay board.

FF Invalid temperature reading on power relay board ...... Check sensor (see Table 4), harness, and power

relay board.**

F &

FC***

Communication error between board........................... Ohm J2 harness wires end to end.* If ok,

replace power relay board. If blue and orange

wires tangled, untangle. If repeat code, use a

noise suppressor, part # 12001500.

FR Second oven error sensed........................................... J2 harness, ohm wires end to end.* If harness is

ok, replace power relay board. If blue and orange

wires are tangled, untangle. If repeat code, use a

noise suppressor, part # 12001500.

No display on clock: Voltage from J1-1 to J1-2 should be 13 VDC. Voltage from J1-3 to J1-4 should be 21.2 VAC.

NOTES: * Disconnect and reconnect power. If clock does not resume time (displays 12:00), replace main board.

** Sensor resistance at room temperature should be between 1050 – 1100 ohms.

*** If this occurs on SVE47500 units, refer to the U&C manual to operate the grill.

Table 3: Jenn-Air Wall Ovens and Slide-In Ranges Meat Probe Resistance

Meat Probe Resistance

Degrees F (C) Resistance

122 (50) 18963

150 (65.5) 9938

156.2 (69) 8846

165.2 (74) 7456

210.1 (98.9) 3886

Table 4: Jenn-Air Wall Ovens and Slide-In Ranges Oven Sensor Resistance

Oven Sensor Resistance

Degrees F (C) Resistance

100 (37.7) 1143

200 (93.3) 1350

300 (148.8) 1553

350 (176.6) 1654

400 (204.4) 1753

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 18 19

Kommentare zu diesen Handbüchern

Keine Kommentare

Maytag AOCS3040 Bedienungsanleitung Seite 9

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Öfen Maytag AOCS3040